What is an RT zone?
A: The Research and Technology (RT) Zone is a new zoning classification that will be applied to two existing industrial areas in Huntington Beach. This area contains industrial and research and technology uses and is directly adjacent to Boeing and C&D/Zodiac Aerospace.
What is r8 zoning in Baltimore City?
Most of the neighbor- hoods surrounding downtown are zoned R-8. (58 dwelling units per acre) and multi-family housing (79.2 units per acre). single family attached townhouses (58 units per acre) and multi-family housing (217.8 units per acre).
What is residential transition?
Residential Transition Loan or “RTL Loan” shall mean a Mortgage Loan secured by a Mortgage on a Mortgaged Property with a principal balance of not more than $1,500,000.00, the proceeds of which shall be used for the purchase, financing, or refinancing and subsequent renovation of such Mortgaged Property; provided.
What does miscellaneous residential mean?
Miscellaneous residential occupancies have no bedroom, kitchen or full bathroom as defined by Policy 1-4-1 or 1-4-5, unless permitted as a second unit or guest house as defined above.
What is R5 zoning in Maryland?
R5 – Residential This District is generally intended for low-medium density single-family detached residential development at an urban density of 5 dwelling units per acre. Minimum lot size is 7,000 square feet. Maximum lot coverage by structures is 40%.
What is PDP zoning?
Agricultural District. Agricultural/Residential Districts. Zoning districts that begin with PDP are Planned Development Projects. These are specialized flexible districts. The permitted uses and setbacks are unique to each approved project and the Zoning office should be contacted to verify the information.
What does R 3 zone mean?
Residential, Multi-Family Medium-Density
R3 (Residential, Multi-Family Medium-Density) District. The R3 zoning district provides for the development of a wide range of multi-family dwelling units, including apartments and condominiums.
What is R4 high density residential?
What is zone R4 High Density Residential? In the R4 High Density Residential zone, residential flats are appropriate and encouraged to create a more dense urban form than the other residential zones.
What is a residential transition loan?
Borrowers of residential transitional loans—or flip loans, as they are better known—use the money to buy a property, renovate it and then try to quickly resell at a profit. They have become a lucrative and growing niche of finance in recent years.
What does R-8 residential district zoning mean?
(R-8) Residential District Zoning This district is defined as high density residential areas where single-family and multi-family dwellings are commingled and certain open areas where similar residential development will be a viable land use. The uses permitted in this district are designed to
What is the OSR for a R8 district?
New buildings in R8 districts may be developed under either height factor regulations or the optional Quality Housing regulations that often reflect the older, pre-1961 neighborhood streetscape. The floor area ratio (FAR) for height factor development in R8 districts ranges from 0.94 to 6.02; the open space ratio (OSR) ranges from 5.9 to 11.9.
Where are R8B contextual districts in New York City?
R8B contextual districts usually present the same unified blocks of “brownstone” rowhouses as R5B and R6B districts but the higher floor area ratio (FAR) of 4.0 creates a taller building that is commonly found on the narrow side streets of the Upper West Side and the Upper East Side in Manhattan.
How tall can a building be in a R8A district?
The contextual Quality Housing bulk regulations, which are mandatory in R8A districts, typically result in high lot coverage apartment buildings of roughly 12 to 14 stories, set at or near the street line. Limitations on the base height and maximum building height of new buildings ensure compatibility with existing buildings on the street.