What is the density of 4-Methylcyclohexanol?
density. 0.914 g/mL at 25 °C (lit.)
What is the molecular weight of 4-Methylcyclohexanol?
Is 4-Methylcyclohexanol soluble in water?
|Solubility Information||Soluble in water (15mg/ml at 20°C),ether,alcohols,and many organic solvents.|
|Chemical Name or Material||4-Methylcyclohexanol cis + trans, cis + trans|
What is the boiling point of 4-Methylcyclohexanol?
Is 4 Methylcyclohexanol flammable?
ICSC 0296 – 4-METHYLCYCLOHEXANOL. Combustible. Above 70°C explosive vapour/air mixtures may be formed. NO open flames.
Is 4 methyl cyclohexanol optically active?
Only 2 & 4 are active optically.
What are the safety warnings for 2-Methylcyclohexanol?
May cause respiratory tract irritation. Skin May be harmful if absorbed through skin. May cause skin irritation. Eyes May cause eye irritation.
Is 2-Methylcyclohexanol a secondary alcohol?
Thus, the goal of this work is to offer an interesting green approach for the reaction of alcohol dehydration using as, primary alcohols: 1-heptanol and 1-octanol; as secondary alcohols: cyclohexanol and 2-methylcyclohexanol, and as tertiary alcohol 1-methylcyclohexanol, using an activated bentonitic clay (Tonsil) as …
What is the melting point of 4 methylcyclohexanol?
C 7 H 14 O. Melting Point. -41 °C. MSDS. USA. Flash Point. 70.0±0.0 °C. 4-Methylcyclohexanol structure. Common Name.
How to remove 4-methylcyclohexanol from the skin?
Rinse and then wash skin with water and soap. First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention. Rinse mouth.
Is the methyl ester of Cyclohexanemethanol toxic to rats?
The methyl ester of this acid is also listed as one of the major impurities in the “crude MCHM” as supplied by Eastman. The closely related compound cyclohexanedimethanol (CAS 105-08-8) exhibits low toxicity (3.5 g/kg) when fed orally to rats.
How is 4-methylcyclohexanemethanol used to clean coal?
U.S. Patent 4915825 describes a froth flotation process for cleaning coal where a mixture of 95% MCHM, 4% water, and 0.1% 4-methylcyclohexanemethanol monoether (such as 4- (methoxymethyl)cyclohexanemethanol) is used as a frothing agent, and finely divided coal particles adhere to air bubbles induced into the agent which rise to the surface.