Is UniFi video still supported?

On January 15th, 2021, UniFi Video will no longer be supported by Ubiquiti. If you have a UniFi Video installation we recommend upgrading to UniFi Protect, Ubiquiti’s go-forward product for security camera installations.

How do I adopt a camera from UniFi?

Steps: Token Adoption

1. Navigate to the NVR’s Settings page.
2. If the Camera Adoption Token field is empty, click NEW TOKEN.
3. Navigate to the camera’s web interface by entering its IP address in the browser.
4. Enter the IP address of the NVR in the UniFi Video server field.
5. Enter the Adoption Token in the Adoption Token field.

How do I access my UniFi camera?

Enter your Username and Password of your Ubiquiti account to connect the account to the NVR. On the Cameras page, you have the option to view all cameras (default), a selected group of cameras, or a single camera, depending on your search criteria.

How do I access UniFi video?

The UniFi Video configuration portal is accessed by using a web browser. There are two ways to access the portal: Ubiquiti Device Discovery Tool For users with a DHCP‑enabled LAN and using the Chrome browser. Direct Connection to UniFi NVR Configure the UniFi NVR by connecting it directly to your computer via Ethernet.

Is UniFi Protect worth it?

Unifi Protect does a great job of finding the perfect balance between flexibility and ease-of-use. You can choose between a wide variety of cameras, which you can all install with PoE (Power-over-Ethernet) and get it up and running in a couple of minutes.

Can I use other cameras with UniFi Protect?

What cameras and other devices are compatible? UniFi Protect is compatible with all G2, G3, and G4 cameras and doorbells with the prefix UVC (UVC, UVC-G3, and UVC-G4), as well as all Protect IoT devices with UFP and UP prefixes.

Can UniFi Protect use other cameras?

Where does UniFi video save recordings?

The Default location of recordings are: Windows Default: C:\ProgramDatanifi-video\videos. Linux Default: /var/lib/unifi-video/videos. airVision-C/UVC-NVR Default: /srv/unifi-video/videos.

What do I need to set up a UniFi camera system?

Below is an overview of the steps: • Connect one end of the Ethernet cable to the camera. Insert a microSD card (optional). Perform the camera mounting steps (Wall Mount or Pole Mount). Connect the other end of Ethernet cable to the PoE Adapter or a Ubiquiti Networks TOUGHSwitch™.

How do I remotely access my UniFi controller?

To enable remote access on a software install:

1. Log into your local UniFi Network application as usual.
2. Navigate to System Settings > Administration.
3. Turn the Enable Remote Access feature ON.
4. Enter your Ubiquiti account credentials to Remote Access Portal credentials on the login request and select Enable Remote Access.

Does UniFi Protect Have person detection?

Ubiquiti updated UniFi Protect last October to version 1.16. 9 to add its first addition of AI, with person tracking under the feature, ‘Smart Detection’ and it is still only supported on the G4 line of cameras, which is now the G4 Pro, G4 Bullet, G4 Dome, G4 PTZ and G4 Doorbell.

Do UniFi cameras support Onvif?

UniFi Protect does not support ONVIF, meaning that only Ubiquiti UniFi Cameras are supported.

What does the unifi video camera system do?

The UniFi Video camera system strikes a reasonable balance between flexibility and ease of use. Ubiquiti designed UniFi Video to provide advanced continuous monitoring capabilities with a ton of options to fine-tune and customize both the cameras and network video recorder.

How big is the hard drive for the unifi NVR?

The UniFi NVR (network video recorder) is the central hub of the UniFi Video system, and it comes pre-installed with UniFi’s video software to deploy and manage your cameras. Additionally, the UniFi NVR has a 2 TB hard drive that can store up to 700 hours of video at 1080p, and more if you use a lower resolution.

How do I change the recording mode on unifi video?

In UniFi Video, cameras must first be configured to either Always Record or Record Only Motion mode before recordings will be generated. You can view the recording mode in the Camera page of UniFi Video. To change the recording mode: Log in to the UniFi Video Controller and go to the Cameras section.

Which is the last version of unifi video?

UniFi Video v3.1.5 is the last version that supports airCam models. This article is useful if your cameras are on a different network than your NVR, or are otherwise not appearing in your NVR’s camera list. There are two methods to adopt directly, Manual adoption, or Token Adoption.