Which IC is used in the voltage regulator circuit?

7805 IC
7805 IC is used in a wide range of circuits. The major ones being: Fixed-Output Regulator. Positive voltage Regulator in Negative voltage Configuration.

What is a voltage regulator IC?

A voltage regulator is one of the most widely used electronic circuitry in any device. It is an integrated circuit whose basic purpose is to regulate the unregulated input voltage (definitely over a predefined range) and provide with a constant, regulated output voltage. …

What is voltage regulator IC LM7805?

The LM7805 is a voltage regulator that outputs +5 volts. Like most other regulators in the market, it is a three-pin IC; input pin for accepting incoming DC voltage, ground pin for establishing ground for the regulator, and output pin that supplies the positive 5 volts. Product Features: 3-Terminal Regulators.

How do you test a voltage regulator with a IC on a multimeter?

Turn on the DC power supply and adjust the output voltage of about 8V or slightly larger. Or alternatively you can use a battery 9V-12V as voltage source. Look at the voltmeter panel when you set the voltage. Prepare a DC voltmeter readings on voltage range 50V to measure the output voltage of the IC 7805.

How many types of IC regulators are there?

There are three types of IC voltage regulators: IC linear voltage regulators, IC switching voltage regulators, and DC/DC converter chips. IC linear voltage regulators use an active pass element to reduce the input voltage to a regulated output voltage.

How to get a replacement of 7805 in Multisim?

So instead getting replacement of 7805 we are going to create it. one solution is that i use a Three Pin Connector and use it according to my own assumption of pins working (in real they work nothing). But what about its footprint because connector’s footprint is not same as a 3 pin voltage regulator.

What is the Convention of the Multisim guide?

Multisim guides use the convention of an arrow ( ) to indicate the start of procedural information. Multisim guides use the construction CTRL-KEYand ALT-KEYto indicate when you need to hold down the “Ctrl” or “Alt” key on your keyboard and press another key.

Is the 7805 a 3 pin voltage regulator?

But what about its footprint because connector’s footprint is not same as a 3 pin voltage regulator. The solution of this is that i change the holes location of connector’s footprint according to dimension of original 7805 by using this yellow highlighted button.