How do I manually configure a Polycom phone via web interface?

You can access the Polycom Web Configuration Utility using any compatible web browser installed on your PC.

  1. Power on the phone.
  2. Confirm that the PC and phone are on the network.
  3. Enter phone’s IP address into your supported web browser.
  4. For Username, enter: Polycom.
  5. For Password, enter: 456.

Where do I find my Polycom password?

You can find your Polycom password by logging into the Admin Portal. Choose “Resources”. Click on the mac address of your phone. There, you will see a 4-digit password which you can use to access your phone.

How do I reset my Polycom Web Configuration Utility password?

To perform a factory reset with the default (or a known) password do the following:

  1. Click on the Home button.
  2. Scroll to the Settings (gear icon) and click on it.
  3. Go to Advanced.
  4. Enter the admin password (456 by default)
  5. Go to Administration Settings.
  6. Go to Reset to Defaults.
  7. Go to Reset To Factory.

What is the default password for Polycom?

The default password (456 / 72227 / blank) for accessing the advanced settings or the web interface of third-party Polycom phones is not being accepted.

How do I connect my Polycom phone to my computer?

Connect Your Polycom Phone

  1. Locate the LAN and PC ethernet ports on the bottom of the phone.
  2. Connect the ethernet cable for your network into the LAN port.
  3. Connect an ethernet cable from your computer or laptop dock/port replicator to PC port, if applicable.
  4. Complete the setup process:

What are the features of Polycom SoundStation IP 5000?

The SoundStation IP 5000 features excellent HD sound quality, 7 ft microphone range, and many other useful features such as PoE Support (Power Over Ethernet). Here we will configure the SoundStation IP 5000 through the web interface in order to register to Callcentric to allow you to place/receive calls.

What is the default administrator password for Polycom?

The default Administratorpassword is: 456. The default Userpassword is: 123. Polycom Web Configuration Utility User Guide Polycom, Inc. 8 To access the Web Utility: 1 Launch a compatible Web browser from your PC and enter the IP address of the phone you wish to configure into the address bar.

How does Polycom SoundPoint pick up HTTP server information?

Ideally you will have the Polycom SoundPoint or SoundStation phones pick up the HTTP server information using a DHCP Server with configurable Option 66. If this is not possible, you can enter the information manually in the web UI of the phone using the procedure outlined below.

How to configure SoundStation IP 5000 admin password?

Log into the SoundStation IP 5000 administrative interface by using the supplied default admin password (456) STEP 2: Configuring your Callcentric account: From the top menu bar, select Settings, followed by the SIP subsection: On this page, please use the settings detailed in the screen captures below.