How much does it cost to upgrade to Dana 44?
The upgrade parts run about $600, while the Dynatrac ProRock 44 housing complete with nodular-iron diff cover and new suspension bushings is around $2,000 through Off Road Evolution.
Do rubicons come with Dana 44?
The Dana 44 is also normally what comes factory on the Rubicon Wrangler trim level, however many choose this axle as a stronger upgrade for when they move to larger wheels and tires.
What axles to TJ rubicons have?
TJ Wranglers will have either a Dana 30 in the front and a Dana 35 in the rear unless you have a Rubicon model. In which case you’ll have 44s front and back. Some TJs with a Dana 30 in the front can have a 44 in the rear as it was an option from the factory.
How big of a tire can a Dana 44 handle?
36-inch
However, as a very general rule, a 36-inch tire is about the limit for a Dana 44.
What jeeps came with Dana 44 axles?
- 1967–1973 Jeepster Commando and Commando.
- 1974–1991 Wagoneer (Passenger side 1974-1979, Driver side 1980-1991)
- 1974–1983 SJ.
- Late 1986 CJ-7.
- 2003–2006 TJ Wrangler Rubicon (Front and rear)
- 2007-2018 JK Wrangler Rubicon (Front and rear)
- 2018-2019 JL Wrangler Rubicon (Front and rear)
- 2020 JT Gladiator (Front and rear)
How can you tell a Dana 35 from a 44?
The easiest way to tell these axles apart is to look at the shape of the differential cover. The Dana 35 cover is pretty much perfectly round. The Dana 44 is sort of a six-sided shape. A Dana 35 (left) compared to a Dana 44 (right).
Are Dana 44 axles good?
At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling. The Dana 44 is also a heavy axle, but it’s significantly lighter than a Dana 60.
Can a Dana 30 handle 35s?
Yes. A Dana30 with 30-spline shafts will be fine for 35″ tires.
Is the Dana 35 really that bad?
Most people never have a problem with them, but everyone has their story good or bad. Drive sensibly and do not put 35s on locked etc and you will get a good long life out of the dana 35. It really depends on your rig and what you plan to do with it.
Is a Dana 44 strong?
It used to be that the Dana 44 was considered to be a fairly stout axle. But as trails got tougher and tires got larger, the 44 got dumped in favor of even stronger hardware. But the Dana 44 is a pretty stout piece, and many companies offer parts to make your 44 even stronger than it now is.
Can Dana 44 handle 35s?
Registered. 35s and 4.10s drive just fine. You can regear if you want but it isn’t necessary at all. I use mine both on and off-road and never have an issue.
Is Dana 44 a good axle?
How big is a TJ Rubicon axle bolt pattern?
• All TJ Rubicon axles had a 5 x 4.5″ bolt pattern. • TJ Rubicon axles require a different seal and carrier shims but with the TJ Rubicon Master Install Kit, standard Dana 44 gears, lockers, and axle shafts will fit. © Copyright Filthy Motorsports, DrivetrainShop.com – Do Not Copy or Reproduce Without Written Permission.
What kind of axles does Dana Spicer 44 use?
Fits Dana Spicer 44 with 30 spline axles 3.73 and down ratio only Patented internal design reduces common locker failures 8620 internals for added strength Assembled in the USA The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing.
Which is Yukon gear and axle Dana 44 install kit?
The Yukon Gear and Axle Dana 44 install kit is available for those of you looking to perform an overhaul, and need all the required components to get the job done. This kit includes everything to perform an overhaul.
What kind of gears are in a Jeep Wrangler Rubicon?
The following gears, lockers and install kits are available for the 2007 to 2017 Jeep Wrangler JK Rubicon with Dana 44 solid front and rear axles. These axles feature oversized pinion gears and heavy duty electric lockers that are good for moderate to aggressive off-roading with up to 40″ tires when properly equipped.