How do I reset my Polycom phone to factory settings?

Follow the steps below to factory reset your Polycom phone:

  1. Press the Menu or Home button.
  2. Select Settings > Advanced. The default admin password is 456.
  3. Select Administration Settings.
  4. Select Reset to Defaults.
  5. Select Reset to Factory.
  6. Select Yes to confirm.

How do I reset my Polycom VVX 301?

Procedure

  1. Press the Menu/Home Key.
  2. Select Settings.
  3. Select Advanced. The Password will depend on the profile:
  4. Select Administration Settings.
  5. Select Reset to Defaults.
  6. Select Reset to Factory.
  7. Select Yes for Are you Sure.
  8. The Phone will reboot twice and it can then be provisioned.

How do I factory reset my Polycom SoundPoint IP 331?

To reset the SoundPoint IP phone’s configuration to the factory defaults using the phone’s menu:

  1. Press the Menu key.
  2. Select Settings > Advanced.
  3. Enter the administrative password, then press the Enter soft key.
  4. Select Admin Settings > Reset to Default > Reset Local Config…
  5. Select the Yes soft key.

How do I reset my Polycom IP 6000 to factory settings?

To restore phone to factory defaults with the Admin Password:

  1. Power cycle the phone.
  2. Press Cancel soft key during the boot process.
  3. During the countdown, press and hold the following dial pad keys simultaneously until the password prompt appears:
  4. Enter the administrator password to initiate the reset.
  5. Press OK.

How do I factory reset my Polycom VVX 450?

Select Restart Phone (or Reboot softkey on the VVX 450)….To perform a factory reset from the advanced menu:

  1. Select Settings from Main Menu, and navigate to Advanced.
  2. Enter the phone’s admin password — 456 (see next if you changed and forgot it.)
  3. Select Admin Settings.
  4. Select Reset to Factory.

How do I factory reset my Polycom vvx201?

Factory Reset

  1. Go off-hook.
  2. Press and hold the 0, 1, and 3 keys until the phone starts to reboot.
  3. Press the Cancel softkey when it appears on the screen (Figure 8-1).
  4. Press and hold the 1, 3, and 5 keys until a password prompt appears.
  5. Enter the MAC address of the phone as the password.

How do I factory reset my Polycom VVX 300?

Reboot the Phone—Press and hold the dial pad keys 0, 1, and 3 simultaneously for about three seconds, or until you hear a confirmation tone. Restore Factory Defaults—Press and hold the dial pad keys 1, 3, and 5 simultaneously during the Updater process until the password prompt appears.

What is the default password for Polycom IP 6000?

456
Enter the password 456 which is the default.

How do I factory reset my Polycom 7000?

How to Reset to Factory Defaults

  1. Press “Menu” on your Polycom phone.
  2. Navigate to “Settings” –> “Advanced”. You will be prompted for a password.
  3. Select “Admin Settings”
  4. Navigate down screen to “Reset to Default”
  5. From the Reset to Defaults menu, navigate to “Reset to Factory”

How do you reset a Polycom VVX 310 without a password?

Easy Polycom Factory Reset Without Password

  1. Click on the Home button.
  2. Scroll to the Settings (gear icon) and click on it.
  3. Go to Advanced.
  4. Enter the admin password (456 by default)
  5. Go to Administration Settings.
  6. Go to Reset to Defaults.
  7. Go to Reset To Factory.
  8. Say Yes when it asks Are you sure?

How do you reset a Polycom VVX 410 without a password?

Step 2: Polycom Factory Reset without Password

  1. Power off the phone by unplugging the power or network.
  2. Plug the phone back in.
  3. Wait until you see Cancel, then press Cancel button.
  4. Quickly press and hold down the following keys:

How do I reset my Polycom VVX 450 without a password?

Is there a way to reset a Polycom SoundPoint IP phone?

To factory reset a Polycom SoundPoint IP phone. Factory resetting a phone will restore the device to its factory default state, erasing all personalized settings, speed dials, line keys, and configuration. These procedures specifically concern the Polycom SoundPoint and SoundStation IP series of phones.

What happens when you reset a Polycom phone?

Factory resetting a phone will restore the device to its factory default state, erasing all personalized settings, speed dials, line keys, and configuration. These procedures specifically concern the Polycom SoundPoint and SoundStation IP series of phones.

Is there a way to factory reset IP 331 Poly?

The phone was previously, and still is provisioned with Vocalocity / Vonage. I have tried pressing 1, 3, 5, 7 and using the Removed by the Moderator, as well as the default 456, but to no avail. Can someone assist me with a mechanism to reset my phone so I can use it on future contracts?

Can a Polycom phone be used with onsip?

OBi versions will not work with OnSIP- they must have the UC/OpenSIP version of Polycom firmware. For security purposes, do not put phones on public static IP addresses. If there is no other option, you must at least disable the web portal on any phone device.