How do I configure my netis modem?

Extenders & Travelers

  1. Hardware Connection. 1.1 Power off your Modem. 1.2 Connect the WAN port on netis Router to the Modem’s LAN port with an Ethernet cable. 1.3 Connect your computer to one of the LAN ports on netis Router with an Ethernet cable. 1.4 Power on your Modem.
  2. Configure the Router via Web Management Page.

How do I access my netis router settings?

Open the web browser and type the IP address of the router (default: 192.168. 1.1) into the address bar, then press Enter. Note: The address 192.168. 1.1 is NOT on the Internet.

What is the IP address of netis router?

192.168.1.1
Check the IP address of the router The default IP address of netis router is 192.168. 1.1, if it was changed but you don’t know the correct one, please reset the router to factory defaults.

How do I update my netis router?

Do not Power off the router when upgrading….Wrong updates will damage your router.

  1. Open browser and Login in WF2419, default IP is 192.168. 1.1.
  2. Download the latest firmware on website.
  3. Click System tools-Firmware Upgrade. Click Browse and choose the firmware download in step 2.
  4. Wait until upgrade success.

How do I reset my netis modem?

STEP 1: Open the web browser and type the IP address of the router (default:192.168. 1.1) into the address bar then, press Enter. STEP 2: Click the “Restore” button, after reboot, the router will erase all of your settings and replace them with the factory default. STEP 3: Wait until it finished.

How do I connect my netis to WIFI?

The Physical connection is as below:

  1. Open browser and Login in the web management page of netis router, default IP is 192.168.
  2. Click Advanced button and enter in the main page of router.
  3. Go to Wireless->Wireless Settings on the left side of the main page, Select the Radio Mode as Client, and click AP Scan button.

How do I log into my netis modem?

Netis DL4480V Default Router Login

  1. Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  2. Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface.
  3. The default username for your Netis DL4480V is guest.

What is the default password for netis router?

password
The default wireless password of netis wireless router is password. 1. Connect your computer to router through network cable.

How do I increase the WiFi on my netis router?

Extenders & Travelers

  1. Open browser and Login to the web management page, default IP is 192.168.
  2. Click Advanced button and enter in the main page of router.
  3. Go to Wireless->Wireless Settings on the left side of the main page, Select the Radio Mode as Repeater, and click AP Scan button.

What is the username and password of netis router?

The majority of Netis routers have a default username of guest, a default password of guest, and the default IP address of 192.168. 1.1. These Netis credentials are needed when doing a login to the Netis router’s web interface to change any settings.

What are the interface buttons on a Netis ADSL modem?

The rear panel of the wireless ADSL2+ Modem Router includes 1 power ON/OFF switch, 1 PWR connector, 1 WPS button, 1 Default button, 4 LAN interfaces and 1 ADSL interface, as explained in table below: Interface/Button Indication

What kind of router does Netis dl4311 use?

Thank you for choosing netis DL4311 150Mbps wireless N ADSL2+ Modem Router. The Wireless N ADSL2+ Modem Router is a device with routing capability, wireless access point, multiple ADSL lines transmission mode (ADSL2+, ADSL2, T1.413, G.Dmt and G.lite) and provides 10/100Base-T Ethernet interface.

Can you upgrade the firmware of Netis wireless routers?

Upgrade with Ethernet cable, do not upgrade wirelessly, it may cause failure and damage the router. 2. Do not Power off the router when upgrading. 3. Do not upgrade remotely, please just directly connect your PC and router and perform the upgrade. 4. Please make sure you upgrade into a right firmware version. Wrong updates will damage your router.

Is the Netis logo a trademark or trade name?

Copyright Statement is a registered trademark of Netis Corporation. Other trademark or trade name may be used in this document to refer to either the entities claiming the marks and names or their products. Reproduction in any manner without the permission of Netis Corporation is strictly forbidden.