How do I fix E1 error on washing machine?
If the error code E1 appears, there is a problem draining the water. First, check the washing machine’s filter. Place a bucket under the rubber pipe and then remove the plug. While it’s draining, remove the filter and rinse it under the faucet.
What does F5 E3 mean on washer?
lid lock
The F5 E3 alert indicates there is issue with the lid lock. Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid.
What is error 3 in washing machine?
Should the error code E3 appears it is warning that the machine is not draining. Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.
What is E6 error in washing machine?
The E6 error is telling you that the clutch is causing the error or fault. This fault can happen if a paperclip, nail, coin, or a different object is jammed in between the tub and pulsator. To clear the E6 error code on a top load LG washer: Take out all clothing or towels from the washer.
What is the meaning of 1E in washing machine?
Share. An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen.
What does E1 mean on washing machine?
When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water. To resolve, checking the following: • Check whether the water supply is turned on and that there is adequate water pressure.
What to do if you get an error code on your washing machine?
Unplug the washer for 10 seconds. Plug the washer back in, ensure that the door is completely closed, and restart the cycle. If the dE1 error code persists, close the water taps; and unplug the washer. The unit will require a repair service.
Why is my Haier washing machine saying error 2?
Haier washing machine error 2 This is an error message signaling the unit’s inability to drain properly within a time specified by the PCB software. Cause 1: blocked pump filter Extract the pump filter and clean it.
What does it mean when your washing machine says DE2?
The dE2 error code indicates that the washer door is closed, but not locking. Unplug the washer for 10 seconds. Plug the washer back in to ensure that the door is perfectly closed, and restart the cycle. If the dE2 error code persists, close the water taps, and unplug the washer.
What does a D3 error code mean on a washing machine?
D3 error code displays as a result of coupling part that is malfunctional. The unit will require a repair service, please visit our Request a Repair page. A dE error code means that the washer was not able to lock the drawer. This might be as a result of: