How do you adjust a geze door?

Clockwise decrease latch action and anticlockwise to increase latch action. Do not overtighten. ➢The closing speed can now be adjusted using the adjustment Valve 1 located on the end of the body of the closer. Clockwise will decrease the closing speed and anticlockwise will increase the closing speed.

How do you adjust the tension on an automatic door closer?

Turn the “L” screw clockwise to increase the speed with which the door closes during the last one-third of its swing. Alternatively, turn it counterclockwise to reduce this speed. Increase the pressure it takes to open the door by turning the “BC” screw clockwise. Turn it counterclockwise to reduce this pressure.

Can a door closer be reversed?

Resolution: The 4110 closer is handed, and will have an “RH” and “LH” on the casting next to the closer shaft. The regulating valves are going to be on the same side as the hand of the closer. Is the 4010 closer handed? Resolution: The 4010 door closer is handed and they are not field reversible.

How to adjust closing speed on Geze door closer?

Do not overtighten. ¾The closing speed can now be adjusted using the adjustment valve located on the front of the body of the closer. Clockwise will decrease the closing speed and anticlockwise will increase the closing speed. Do not overtighten. ¾Test installation by simulating persons using the entrance.

How big does a Geze leaf closer need to be?

Overhead door closer with guide rail for single leaf doors with a leaf width up to 1100 mm Overhead door closer with guide rail, for opposite hinge side, for single leaf doors of up to 1400 mm leaf width Overhead door closer with guide rail for single leaf doors of up to 1400 mm leaf width with electric hold-open device

How big is a Geze automatic swing door?

The Powerturn automatic swing door drive reliably and safely opens large, heavy doors with a leaf weight of up to 600 kg. This powerful GEZE product is also the safe and reliable solution for fire protection doors.

How are the holes on a Geze TS2000 fixed?

The power size (closing force) of the TS2000 is adjusted by moving the body of the closer either towards or away from the hinge point. The three holes that have been drilled for the closer body relate to three of the nine fixing holes on the closer.