Are there Stage6 Sport Pro MkII cylinder kits?

It took Stage6 a while to get one of the most anticipated releases out of the door but finally it happened: The Stage6 Sport Pro MKII and Stage6 Racing MKII cylinder kits are available for Minarelli and Piaggio engines. Read all about them below including Dyno test results!

What’s the horsepower of a Stage6 70cc cylinder?

Stage6 70cc Cylinder Kit Sport Pro MKII.This latest version of the Stage6 70cc Pro Sport MK cylinder can reach between 14 and 17hp, that means 2 – 3 hp more than the older MK 1 version. This increase in hp has been made possible, among other things, by a new transfer port design emphasizing torque and also ensuring maximum reliability.

Is the Stage6 cylinder kit for geared mopeds?

Since its inception, Stage6 are committed to develop performance-enhancing tuning parts and don’t shy away from tackling new tasks. As of now, they are getting into the market for geared mopeds by introducing the Stage6 Cylinder Kit Big Racing.

How many transfer ports are in a Stage6 cylinder?

The oval exhaust port design was revised and optimized, instead of 5 there are 6 transfer ports to allow for optimal refilling of the cylinder. Since its inception, Stage6 are committed to develop performance-enhancing tuning parts and don’t shy away from tackling new tasks.

How much horsepower does a Stage6 Sport Pro have?

Ride this with a Stage6 Pro exhaust and a 17.5mm carburator for an instant 12hp or go hard with a R1200 and up to 21mm for an estimated 15hp. If you want to be real fast and have already gathered some experience in scooter tuning this cylinder allows for 21hp when porting it to the max.

Is the Stage6 sport MkII Street or mid race?

An all aluminium street to mid-race cylinder kit at a very affordable price and with a perfect spare part availability. This kit gives you everything you would expect from an aluminium cylinder and it is not too hard to setup.

What kind of exhaust does Stage6 sport MkII use?

Ride this with a Stage6 R1200 exhaust and a 21mm carburator for an instant 15-16hp boost. In combination with an R1400 or Yasuni C21 and a 24mm+ PWK you will exceed the 18hp. I write this blog and love scooters!