NSP Products for Homeland Security
Do you have questions?
Call North Safety Products, we have market specialists for Disaster Preparedness Products who are ready to assist you!
B144GI Butyl Gloves
#1 Selling Glove for Homeland Security!
These gloves are manufactured to military specifications and WMD chemical requirements Curved hand design provides better dexterity. Made in the U.S.A.
Tests conducted by North Safety Products:
Material Identification, Thickness, Porosity, Tensile Strength (original after aging, after decontamination), Tensile Strength at 200% elongation. Immersion. Low Temperature Stiffness. Deformation due to decontamination solution: After immersion wet-thickness solution. After immersion and aeration-thickness, length. Permanence of marking.
Test that can be conducted by an outside lab:
Mustard gas resistance and GB resistance tests can be completed for an additional charge.
Are gloves that are made to military specification and WMD chemical requirements right for you?
B074GI Butyl, curved hand design, smooth finish, 7 mil, 14" length. Sizes XS- XL
B144GI Butyl, curved hand design, smooth finish,14 mil, 14" length. Sizes XS-XL
B254GI Butyl, curved hand design, smooth finish, 25 mil, 14" length. Sizes XS-XL
Butyl +Neoprene=Unsurpassed Protection The BNI243 is a 24 mil glove that is 18 mil butyl (inner layer) and a 6 mil Neoprene (outer layer). Made in the U.S.A.
BNI243/APM Butyl and Neoprene, curved hand design, smooth finish, 14" length. Sizes XS-XL
12 mil, 14" length.
Viton gloves are specifically made for handling chlorinated and aromatic solvents. Viton exhibits a high degree of impermeability to these solvents and can be used in and around water and water-based solutions. Superior resistance to PCB’s. Sizes: 8 thru 11 Made in the U.S.A.
ChemsoftTM Industrial CS113B
11 mil, 13" length. Blue, unlined interior. Patented formula provides unprecedented comfort and dexterity, with excellent resistance to cuts, snags, abrasion, punctures and chemicals. All without fatigue normally associated with industrial weight nitrile gloves.
Silver Shield/4H SSG
2.7 mil. Ambidextrous. 5 layer design protects against the widest range of chemicals including aromatics, chlorinated solvents, ketones and esters. Gloves are lightweight to allow for maximum protection yet do not contain chemical accelerators that can cause an allergic reaction. Sizes: 6 thru 11.
Lightly powdered blue nitrile, 8 mil, 12" length, rolled cuff, smooth grip, ambidextrous. 50 gloves per pack, sizes: S, M, L, XL
11 mil, 13" length. Green, unlined interior. Offers superior resistance to cuts, snags, abrasion, punctures and chemicals. Sizes: 7 thru 11Additional thicknesses are available. Please call North Customer Service for additional information.