NORTH SAFETY PRODUCTS

Prepare for the Unexpected

The North Safety Incident Response PPE Kits are essential for anyone who responds to disaster incidents. Fire Service,Law Enforcement and Emergency Medical personnel responsible for the control and remediation of an incident need the contents of these kits to protect themselves from various hazards and contaminants which may be encountered.The Inter-Agency Board (IAB) recommends that responders should use the type of items included in these kits. They can be found on their Standard Equipment List (SEL), available at www.iab.gov. All kits are manufactured by North Safety Products so you can be assured they are of the highest quality and have proven performance.

Respiration

CFR-1 Respirator
CFR-1 Particulate RespiratorCFR-1 Respirator
N95 Filters for CFR-1


54401 with 40NBC Canister

Emergency Escape Respirator
Emergency Escape Respirator, with Defender Plus cartridges.

Protective Footwear

NSP Products for Homeland Security
Do you have questions?
Call North Safety Products, we have market specialists for Disaster Preparedness Products who are ready to assist you!

43995 12" Servus Combat Overshoe
Slush molded construction.
Compounded for resistance to chemical and biological agents. Tabbed grips and elastic loops make for easy closing. Buttons are molded as part of the boot, eliminating the chance for Leakage. Meets U.S. Military Spec MIL-O-43995C and WMD Chemical Requirements. Sizes: 3 thru 18. Made in the U.S.A.

11095 SF Chem Overboot
#1 Selling Boot for Homeland Security!
Has been tested to the chemical requirements of the Military Spec MIL-O-43995C, WMD Chemical Requirements and the CID A-A-59520. This boot features a highly durable injection molded construction with tabbed grip and elastic loops for easy closing. The construction is one -piece molded overshoe to eliminate possible leaks. Reinforced in high stress areas. This product is recognized for easy decon and low cost! This boot also features a slip-coated interior (for ez on and ez off) and a slip resistant, self-cleaning outsole. Sizes: Small (7-8), Medium (9-10), Large (11-13), Extra Large (14-15). Made in the U.S.A.

75177 Servus HZT Boot
15" Green, PVC, Steel Toe and Steel Midsole, Knee boot, Triple Density Technology offers dual compound outsole for best slip resistance, Self Cleaning Lug Outsole, ANSI Z41 PT99, Sizes: 7 thru 15 Made in the U.S.A.

A352 Yellow Latex Bootie
12" Latex Bootie, Disposable, Stretch overshoe bootie, Textured outsole, Slip resistant, 100% waterproof, Sizes: Small thru Extra-Extra Large

Hand Protection

NSP Products for Homeland Security

Do you have questions?
Call North Safety Products, we have market specialists for Disaster Preparedness Products who are ready to assist you!

B144GI Butyl Gloves

#1 Selling Glove for Homeland Security!
These gloves are manufactured to military specifications and WMD chemical requirements Curved hand design provides better dexterity. Made in the U.S.A.

Tests conducted by North Safety Products:
Material Identification, Thickness, Porosity, Tensile Strength (original after aging, after decontamination), Tensile Strength at 200% elongation. Immersion. Low Temperature Stiffness. Deformation due to decontamination solution: After immersion wet-thickness solution. After immersion and aeration-thickness, length. Permanence of marking.

Test that can be conducted by an outside lab:
Mustard gas resistance and GB resistance tests can be completed for an additional charge.
Are gloves that are made to military specification and WMD chemical requirements right for you?

B074GI Butyl, curved hand design, smooth finish, 7 mil, 14" length. Sizes XS- XL

B144GI Butyl, curved hand design, smooth finish,14 mil, 14" length. Sizes XS-XL

B254GI Butyl, curved hand design, smooth finish, 25 mil, 14" length. Sizes XS-XL

BNI243 Gloves
Butyl +Neoprene=Unsurpassed Protection The BNI243 is a 24 mil glove that is 18 mil butyl (inner layer) and a 6 mil Neoprene (outer layer). Made in the U.S.A.

BNI243/APM Butyl and Neoprene, curved hand design, smooth finish, 14" length. Sizes XS-XL

Viton® F124
12 mil, 14" length.
Viton gloves are specifically made for handling chlorinated and aromatic solvents. Viton exhibits a high degree of impermeability to these solvents and can be used in and around water and water-based solutions. Superior resistance to PCB’s. Sizes: 8 thru 11 Made in the U.S.A.

Chemsoft^TM Industrial CS113B
11 mil, 13" length. Blue, unlined interior. Patented formula provides unprecedented comfort and dexterity, with excellent resistance to cuts, snags, abrasion, punctures and chemicals. All without fatigue normally associated with industrial weight nitrile gloves.

Silver Shield/4H SSG
2.7 mil. Ambidextrous. 5 layer design protects against the widest range of chemicals including aromatics, chlorinated solvents, ketones and esters. Gloves are lightweight to allow for maximum protection yet do not contain chemical accelerators that can cause an allergic reaction. Sizes: 6 thru 11.

LA0812 Gloves
Lightly powdered blue nitrile, 8 mil, 12" length, rolled cuff, smooth grip, ambidextrous. 50 gloves per pack, sizes: S, M, L, XL

NitriGuard LA102
11 mil, 13" length. Green, unlined interior. Offers superior resistance to cuts, snags, abrasion, punctures and chemicals. Sizes: 7 thru 11Additional thicknesses are available. Please call North Customer Service for additional information.

Head Protection

Peak Series
Hard hat with rain trough, pin lock adjustment, 4-point plastic suspension

Peak Series
Hard hat with rain trough, Ratchet adjustment, 4-point nylon suspension

Peak Series
Hard hat with rain trough, Pin lock adjustment, 4-point nylon suspension

First Aid

Emergency Preparedness First Aid Kit
Emergency Preparedness First Aid Kit: Standard first aid items, and items also needed for incidents of a more unspeakable nature, such as anti-radiation pills.

Emergency Eyewash
Emergency Eyewash, Individual 16 oz. Bottle