GRACE INDUSTRIES, INC

Safety Products Company

Grace Industries, Inc. is the parent company of Grace Sales, Inc., and is a family owned business incorporated in October 1974. They are located sixty miles north of Pittsburgh, in Fredonia, Pennsylvania. Their primary business focus is on safety products, with special emphasis in advanced technology through research and development. Mr. James Campman, founder and President of Grace Industries, Inc. is an electrical engineer who previously worked with Bell Labs and the National Aeronautics and Space Administration (NASA).

During the past several years, Grace Industries, Inc. developed and manufactured a complete line of hydrocarbon detectors and other safety products used both in the public and private sector. The Grace hydrocarbon detector set the standard in gas detection equipment used in arson detection in major fire departments throughout the nation.

Personal Alert Safety Device

In 1988, the company recognized the need of emergency service workers for a personal alert safety device that was compact and dependable, and that would produce an audible warning beacon that could be heard over background noises at a great distance. To accomplish this goal, Mr. Campman invented technology which led to the development of the SUPERPASS^TM. Currently, Grace Industries, Inc. produces the largest line of stand-alone NFPA compliant PASS devices in the world.

Employee Monitoring System

The company was approached by fire service leaders and asked to develop technology to solve the problem of personnel accountability. In response to this request, Mr. Campman integrated a spread spectrum radio telemetry signal into the PASS device, and the GEM System^TM was born. This device not only provides the loudest audible alarm when the wearer becomes motionless, but also transmits a signal to a remote receiver indicating that a firefighter is in trouble.

After four and one half years and two million dollars in research and development costs, the GEM System^TM is now available on the market in both one-way and two-way signaling configurations.

This state of the art technology is the single largest quantum leap in personnel safety and accountability since self contained breathing apparatus was introduced in the fire/rescue service. This advanced life-safety system provides immediate notification of firefighters in distress AND provides a means to send an evacuation signal to firefighters when conditions deteriorate.

After September 11, 2001, development of a two-way signaling PASS system became a priority. All other R & D projects were moved to the back burner. The result of this effort was the introduction of the T PASS 3 EvacuateTM, which offers command officers, correctional officers, security and industrial personnel the means to send an Evacuate or Call Back signal to all operational at the incident scene of work site.

The GEM System^TM now features the T PASS 3 EVACUATETM - A 2-Way Signaling PASS System. Features immediate notification of firefighters in distress PLUS offers Evacuation Signaling. In the sudden event of a flashover, a collapse situation, or other imminent danger, Grace Industries` GEM System^TM, featuring the T PASS 3 EVACUATETM will immediately identify, by name, any employee whose T PASS 3 EVACUATETM is in ALARM!!

Grace Industries` MR-900 Interface

Grace Industries announces the introduction of the MR-900 Micro-Receiver for integration with Cellular Telephone/AVL Systems, Satellite/GPS Telephone Systems, and Data Radios. For the integrator or end user who wishes to implement a ``Mobile Lone Worker Monitoring System`` that is cost effective, easy to install and meets the UL 913 Standard for intrinsic Safety, the MR-900 is your answer. The MR-900 compact radio receiver is designed to receive signaling data from Grace Industries line of telemetry based personal life safety products. The MR-900 is powered from a +12VDC source and is suitable for use inside a vehicle, or other mobile equipment.

AVL Systems that currently track your mobile fleet can be enhanced to provide immediate notification of employees in distress at remote locations or when their work takes them away from their vehicle (Up to ¼ mile).

GEM & PASS Systems

The GEM System™
With its revolutionary spread-spectrum radio technology, the Grace Employee Monitoring System (GEM System™) provides instant and continuous safety monitoring of personnel. If an employee becomes incapacitated, a personalized distress signal is transmitted automatically, identifying, by name, the person in trouble. The GEM System™ allows one person to effectively monitor the status of hundreds of employees, in a number of areas and/or large groups. GEMS™ is the LINK TO SAFETY!!

GEM System™ Applications: Firefighting, Industry, Hazardous Materials, Confined Space Operations and Rescue, Man Down Systems, Personal Safety, Major Operations, plus Many More

Industrial
Automatically notifies if any employee becomes injured, is otherwise incapacitated, or has a medical emergency!

Fire/Rescue
In the sudden event of a flashover or collapse situation, Grace Industries` GEM System™ will immediately identify, by name, any firefighter(s) in distress!! It`s the firefighters` LINK TO SAFETY!

Correctional & Security
When an officer or employee in a correctional facility needs assistance, Grace Industries` GEM System™ will immediately identify, by name, the officers or employees in distress!! It`s the correctional officer`s LINK TO SAFETY!

Firefighters, Industrial workers & Correctional officers want the security of knowing that help will be there if they need it; especially those workers who operate in hazardous environments, confined spaces, or who service dangerous machinery.

Using revolutionary spread spectrum radio telemetry, combined with patented space age solid state accelerometer, each high powered Transmitting Personal Alert Safety System (T PASS II™) transmitter will immediately relay the distress signal back to the command post indicating that an alarm condition exists. GEM System`s™ LCD Command Receiver employs visual and audible warnings that a firefighter`s T PASS II™ alarm has been activated. The GEM System™ detects a lack of motion by the employee(s), and automatically transmits a distress, or `MAN-DOWN` signal via spread spectrum radio telemetry to the Command Receiver. Employees may also activate the manual `call for help` feature to immediately summon assistance.

During alarm conditions the name of the employee in distress are prominently displayed on the LCD Display Screen. The distress signal can be manually activated using the alarm button, or automatically activated if the firefighter is injured and ceases movement. Additionally, command officers, at the push of a button, will know immediately the names of all personnel who are on the scene and whether or not their T PASS II™ device is activated.

Regardless of the size of the personnel base or type of Incident Command System in your department, Grace Industries, Inc. has a GEM System™ to suit your needs.

One and two station departments, fire companies in rural locations, military and airport installations can select the GEM System`s™ 2, 4, 8, 12, or 16 channel configurations, based on personnel and response system requirements.

The ability to respond rapidly to an employee`s call for help, whether activated manually or automatically, can mean the difference between life and death. Firefighters, rescue workers, industrial workers and correctional/security officers risk injury or death on every incident. Employees are more confident when the employer demonstrates the level of concern necessary to respond when they are in trouble.

PASS Devices
The word PASS is an acronym for Personal Alert Safety System. Its purpose is to sound a loud, highly discernible audio alarm if a distress condition occurs. The device will sense an absence of motion if the wearer becomes immobilized for 25 seconds. Its alarm must function in the manual or automatic mode to assist rescue crews in locating the firefighter in distress.

Grace Industries, Inc. is the only United States manufacturer of Personal Alert Safety System (PASS) devices. These rugged and durable life safety products are the smallest, lightest, and LOUDEST PASS devices on the market. Third party certified to meet or exceed the requirements of NFPA Standard 1982 (`98 edition), they are available in motion only models and motion and temperature models.

The Super PASS IITM is the first of the `Auto On` series of NFPA compliant Personal Alert Safety Systems (PASS) from Grace Industries, Inc. The `Auto On` feature provides the next level of assurance that PASS are not only being worn, but are turned on `automatically` when removed from the `Storage` position.

When removed from the `storage` position, the Super PASS IITM Accountability Storage Key automatically pops off putting the unit into the `Sensing Mode` (ON). When Super PASS IITM turns ON, a series of loud attention getting audio tones are heard accompanied by the visual wig-wag display of four yellow L.E.D`s, indicating that the unit is in the `Motion Sensing Mode`.

When there is a lack of motion for approximately 18 to 23 seconds the unit goes into the `Pre-Alarm` mode and annunciates an audible `Pre-Alert` signal; the yellow wig-wag display is replaced by the intermittent pulsing of four red L.E.D`s accompanied by a sweeping `Pre-Alarm` audio signal, which grows progressively louder. The longer the unit is in `Pre-Alarm`, the louder the sweeping `Pre-Alarm` signal becomes, signifying that the unit is closer to the full `Alarm` mode.

After a lack of motion lasting approximately 30 to 35 seconds, the unit goes into the `Alarm` mode. When in `Alarm` the `Pre-Alarm` display is replaced by the constant rapid pulsing of four red L.E.D`s, which is accompanied by loud audio `Alarm` signal that rapidly varies in pitch. This feature is invaluable for recognizing and locating downed firefighters. Once in `Alarm`, pressing both side buttons simultaneously can reset the unit.

When in the `Sensing` mode, the Super PASS IITM may be put into the `Alarm` mode at any time by manually pressing the `Alarm` button located on the front surface of the unit. To turn the Super PASS IITM Off, simply replace the Accountability Storage Key, thereby returning the unit to the `Storage` position, and pressing both side buttons simultaneously.

The Accountability Storage Key is a value-added benefit of Grace Industries Super PASS IITM. The clear Identification Window provides the opportunity to specifically identify the user through the ability to personalize the keys with photos, names, numbers, department ID, bar codes, etc. The clear access window easily snaps into place to protect the enclosed information and provide instant access for rapid identification should the need arise.

Gas Detectors & Lighting/Signaling Products

Gas Detectors

Whether you`re in need of state-of-the art hydrocarbon and gas detectors for firefighting or industry, Grace has what you need. Among their applications: monitoring in manholes, storage tanks, well casings and other confined spaces, maintenance, pubic utilities, public safety, arson investigation, refineries, hospitals, laboratories, chemical plants, inspectors, mills & more. Check out our line of detectors that will meet any of your needs.

HAZ-ALERT™

The HAZ-ALERT™ is a small, lightweight gas and temperature alarm that detects and sounds an alarm if any of 125 toxic/combustible gases or vapors are present. The automatic temperature sensor sounds an alarm if excess heat build-up occurs, such as in a heat stress situation. This alerts the wearer of impending danger.

The emergency CALL FOR HELP ALARM is activated by pressing the button located on the front of the unit. This provides a loud (95 dBA) series of audio alert tones. The HAZ-ALERT™ may be attached to a line and lowered into manholes, storage tanks, well casings or other confined spaces. The device may be worn as a personal monitor when working in these types of environments and can be used to summon help by pressing the EMERGENCY CALL FOR HELP button. It is excellent for use as a personal heat stress alarm and can be used when decontaminating haz-mat suits to detect residual hydrocarbon materials.

GAS PEN™
Small in size and large in performance best describes the capabilities of the GAS PEN™ Model GP-70. Housed in a rugged aluminum case, it measures only 7`` long X 1-1/4`` in diameter. By clipping it to a pocket or belt, it serves as an excellent personal monitor. The GP-70 is capable of detecting gas leaks of more than one cubic foot per year or gas concentrations of less than 50 parts per million for a wide range of toxic/combustible gases (test gas is methane). The GAS PEN™ Model GP-70 is powered by a rechargeable NiCad battery and comes with its own charger and carrying case.

Model C & C+
The Model C & C+ are highly sensitive hydrocarbon detectors. The Model C is a non-calibrated detector that is used primarily for arson investigation to detect trace amounts of hydrocarbons. The Model C+ features both a high sensitivity mode and a calibrated mode of operation.

The Model C+ is used to determine if a gas is explosive, and will only annunciate if the gas has exceeded the preset level of 10% of the LEL (test gas is methane). The Model C+ may also be calibrated to detect other gases and concentrations. Both models easily detect fuel oil concentrations of less than 200 parts per million. These units come complete with storage case and battery charger.

Model 850 Investigator`s Aid
The Model 850 Investigator`s Aid is a rugged, non-calibrated detector which detects the presence of hydrocarbons/accelerants/gases that may be present at a fire scene and is equally effective as a general purpose gas detector. It incorporates advanced signal processing techniques which make it one of the most effective and reliable survey tools available. In addition to its uses in the arson investigation field, the Model 850 is an excellent tool for use in detecting: Methane Outgassing (landfills), Leaking Underground Storage Tanks, Hazardous Materials and Petrochemicals

Model 851 Investigator`s Aid
The Model 851 Investigator`s Aid is a rugged calibrated detector which is excellent for detecting hydrocarbons/accelerants/gases that may be present at the fire scene and is equally effective as a general purpose gas detector. It incorporates advanced signal processing techniques and features two modes of operation: a high sensitivity search mode for locating very small gas leaks, and a calibrated mode that indicates 0% to 100% of the LEL (methane is test gas). In addition to its uses in the arson investigation field, the Model 851 is an excellent tool for use in detecting: Methane Outgassing, Leaking Underground Storage Tanks, Hazardous Materials and Petrochemicals

Personal Lighting & Signaling
We offer the best personal lighting and signaling products on the market for firefighting and industry. Grace Industries` LITE TRACKER is a bright flashing visual indicator that allows instant recognition of personnel. This small, lightweight device is easily attached to clothing, helmets, or belts, and can be seen at a distance of one mile or greater. Our Traffic Master Glow Baton is a solid state, light emitting signaling device. The Traffic Master Glow Baton is made of high quality polycarbonate, and is built to perform under the most adverse and hazardous conditions.

PUBLIC SAFETY, INDUSTRIAL, RECREATION AND GENERAL PURPOSE APPLICATIONS

Lite TrackerTM
Grace Industries` LITE TRACKERTM is a bright flashing visual indicator which ensures that the wearer can be seen at night or in low visibility conditions. This small, lightweight device is easily attached to clothing or belts, and can be seen at a distance of one mile or greater. LITE TRACKERTM is built to precision standards and is made of tough polycarbonate plastic, making it virtually indestructible and is waterproof, making it ideal for marine applications. The unit is an excellent choice for use on personal flotation devices with the U.S. Coast Guard Approval option.

Traffic Master Glow BatonTM
The Traffic Master Glow BatonTM is a solid state, light emitting signaling device. The Traffic Master Glow BatonTM is made of high quality impact-resistant durable plastics and is built to perform under the most adverse and hazardous conditions. It is non-incendiary and can be used in situations where typical flares would be too dangerous. The Traffic Master Glow BatonTM is waterproof appropriate for use in and around water. The unit may be submerged in water to depths of 50 feet. The battery is easily replaced by removing the end cap. This high performance, state-of-the-art signaling device is available in various colors. Some models feature a choice of colors with simple push-button operation. The Traffic Master Glow BatonTM is a must in low light conditions where signals must be seen.